someone has to know this.......

 
Post new topic   Reply to topic    e-hatch.com Forum Index // Wheel/Tire/Brakes
View previous topic :: View next topic  
Author Message
moto21dx
pro


Joined: 02 Dec 2005
Posts: 1152
Posts per day: 0.26

PostPosted: Tue Jun 13, 2006 9:17 pm    Post subject: someone has to know this....... Reply with quote
ok, my last time to do this. Ive looked alot of places, and asked alot of peeps. I dont go on honda-tech either....

I want crv brakes on my eg. I dont know why peeps havent done this alot or someone has to have a bracket doneup for this. So many peeps doing the itr swap, when the crv can be done cheaper (parts wise, not sure on labor yet) but i have the entire setup sitting on a 99 crv now. does anyone know how i can do this? or is any companies have made any brackets to do it? 5x114 is calling me!!!







so are the gunmetal advans LMFAO
_________________
STSHatch wrote:
she is so gross to me.... I wouldnt fck her with elson's dck and simon pushing.
Back to top
View user's profile Send private message
moto21dx
pro


Joined: 02 Dec 2005
Posts: 1152
Posts per day: 0.26

PostPosted: Tue Jun 13, 2006 9:57 pm    Post subject: Reply with quote
so far, ive only HEARD that the fronts will work. but also, what would I do about the axles? since crv is b series, and longer?
_________________
STSHatch wrote:
she is so gross to me.... I wouldnt fck her with elson's dck and simon pushing.
Back to top
View user's profile Send private message
Schrader
Site Sponsor


Joined: 14 May 2005
Posts: 632
Posts per day: 0.14
Location: Northern, British Columbia

PostPosted: Tue Jun 13, 2006 11:11 pm    Post subject: Reply with quote
Okay I have been doing some searching and haven't really come up with anything really good. I can't remember your setup moto, do you have a B series in you hatch?? If so you can do this swap, Not sure if the knuckles are needed but some peeps on H-t put them on and they seem to work well. You will also need CRV axles and hubs, because the Axle splines on the CRV's are bigger (38mm). If you have a D series Engine I think your out of luck. Unless someone can prove me otherwise.
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
moto21dx
pro


Joined: 02 Dec 2005
Posts: 1152
Posts per day: 0.26

PostPosted: Wed Jun 14, 2006 12:11 am    Post subject: Reply with quote
eyah i have the sohc zc. BUT, ive seen full race civic d series pushing like 400+ hp and they used like stage 3 b series axles???????? thats where im getting lost.

Im also not sure on the rears. alot of peeps have talked about having to use preludes or something. If I cant use what I have access to I wont do it. but if its feasible, ill likely give it a shot.
_________________
STSHatch wrote:
she is so gross to me.... I wouldnt fck her with elson's dck and simon pushing.
Back to top
View user's profile Send private message
Schrader
Site Sponsor


Joined: 14 May 2005
Posts: 632
Posts per day: 0.14
Location: Northern, British Columbia

PostPosted: Wed Jun 14, 2006 12:50 am    Post subject: Reply with quote
May have been custom Axles. YOu can take them apart and put d series stuff on B series stuff. But someone on H-t said it can't be done for some reason. Maybe the Cradle that the bearings sit in is different in the CRV axle or something, I am unsure.
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Schrader
Site Sponsor


Joined: 14 May 2005
Posts: 632
Posts per day: 0.14
Location: Northern, British Columbia

PostPosted: Wed Jun 14, 2006 12:51 am    Post subject: Reply with quote
Here Moto, I found big write up of differnt setups. Its quite a lot of reading, but its worth it.

http://hybrid2.honda-perf.org/tech/bigbrakes.html
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
jromodrift
newb


Joined: 26 Feb 2006
Posts: 34
Posts per day: 0.01
Location: SGV, CA

PostPosted: Sun Jul 23, 2006 2:48 am    Post subject: Reply with quote
have you done the set up yet if not pm me i've done that set up on my hatch with ex knuckles, T23 caliper brackets milled, Prelude rotors(slotted the mounting wholes to fit the 4x100 pattern, this was fine since they are hub centric)and the calipers.
Back to top
View user's profile Send private message MSN Messenger
moto21dx
pro


Joined: 02 Dec 2005
Posts: 1152
Posts per day: 0.26

PostPosted: Sun Jul 23, 2006 10:52 am    Post subject: Reply with quote
nah. i decided it wasnt worth it lol. i still may do it later though.
_________________
STSHatch wrote:
she is so gross to me.... I wouldnt fck her with elson's dck and simon pushing.
Back to top
View user's profile Send private message
Soulless
pro


Joined: 14 Apr 2005
Posts: 1034
Posts per day: 0.22
Location: Houston

PostPosted: Sun Jul 23, 2006 10:24 pm    Post subject: Reply with quote
I just went with teg front brakes..much easier...and now I have a spare set..
_________________
Teal Hatch Cult
Miss Hatchy wrote:
^ yah, listen to the man! He knows what he is talking about Very Happy
Back to top
View user's profile Send private message AIM Address MSN Messenger
moto21dx
pro


Joined: 02 Dec 2005
Posts: 1152
Posts per day: 0.26

PostPosted: Mon Jul 24, 2006 10:36 am    Post subject: Reply with quote
well my ONLY reason for wanting the 5 lug obviously was for the gunmetal advans lol. but i cant see myself dropping so much time and effort just for a set of rims lol.
_________________
STSHatch wrote:
she is so gross to me.... I wouldnt fck her with elson's dck and simon pushing.
Back to top
View user's profile Send private message
jromodrift
newb


Joined: 26 Feb 2006
Posts: 34
Posts per day: 0.01
Location: SGV, CA

PostPosted: Fri Aug 11, 2006 6:09 pm    Post subject: Reply with quote


This is my front brake upgrade. 11.1 rotors with Type R calipers on a 4x100 bolt pattern. Not that hard at all, only time consuming.
Back to top
View user's profile Send private message MSN Messenger
Post new topic   Reply to topic    e-hatch.com Forum Index // Wheel/Tire/Brakes All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

      What is RSS?
Powered by phpBB © 2001, 2002 phpBB Group